JUNOSe 11.1.x Quality of Service Configuration Guide
Parameter Instances for QoS Clients Overview
The QoS administrator implements a QoS architecture for the provider based on QoS
profiles and parameter definitions. The QoS client creates the parameter instances
and attaches QoS profiles to logical interfaces. The QoS client can be a user accessing
parameters through CLI or through client software such as RADIUS or SRC.
As a QoS client, you can use QoS parameter instances to set the following attributes
of a node or queue:
Global QoS Parameter Instance Overview
In the following example, a parameter instance is created in Global Configuration
mode.
When you create a parameter instance in Global Configuration mode, the value that
you set for a rate becomes the default value for the router. We recommend that you
create a global default value for a parameter instance to provide a minimal level of
service by default for the router.
240
Parameter Instances for QoS Clients Overview
assured-rate
controlled-interface-type
instance-interface-type
node
qos-parameter-define
qos-profile
queue
range
scheduler-profile
shaping-rate
shared-shaping-rate
subscriber-interface-type
traffic-class
weight
Assured rate
Shaping rate
Shared-shaping rate
Scheduler weight
host1(config)#qos-parameter max-subscriber-bandwidth 8000000