Attaching A Qos Profile To An Interface Superset Or An Interface Set; Configuring A Qos Profile For An Interface Superset Or An Interface Set - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

JUNOSe 11.1.x Quality of Service Configuration Guide

Attaching a QoS Profile to an Interface Superset or an Interface Set

You can configure a QoS profile to manage the scheduler resources for an interface
set or an interface superset.
Tasks to attach a QoS profile to an interface set or an interface set include:

Configuring a QoS Profile for an Interface Superset or an Interface Set

To configure a QoS profile to manage the scheduler resources for an interface superset
or an interface set:
1.
2.
3.
Attaching a QoS Profile to an Interface Superset
To attach a QoS profile to an interface superset:
1.
218
Attaching a QoS Profile to an Interface Superset or an Interface Set
qos-parameter
qos-profile
Configuring a QoS Profile for an Interface Superset or an Interface Set on page 218
Attaching a QoS Profile to an Interface Superset on page 218
Attaching a QoS Profile to an Interface Set on page 219
Configure the QoS profile.
hos1(config)#qos-profile vlan
Specify an interface superset or an interface set as a queue.
For interface supersets:
host1(config-qos-profile)#superset queue traffic-class video
For interface sets:
host1(config-qos-profile)#set queue traffic-class video
Specify an interface superset or an interface set as a node.
For interface supersets:
host1(config-qos-profile)#superset node scheduler-profile video
For interface sets:
host1(config-qos-profile)#set node scheduler-profile video
Specify the QoS interface superset.
host1(config)#qos-interface-superset vlan-superset