JUNOS 10.4 Protected System Domain Configuration Guide
Related
Documentation
Displaying System Component Status
Purpose
Action
204
The following sample output appears when power domain information is displayed:
system> fuelg
Note: All power values are displayed in Watts.
Power Domain 1
--------------
Status: Power domain status is good.
Modules:
Bay 1:
2880
Bay 2:
2880
Power Management Policy: Basic Power Management
Power in Use:
Total Power:
Allocated Power (Max):
Remaining Power:
Power Domain 2
--------------
Status: Power domain status is good.
Modules:
Bay 3:
2880
Bay 4:
2880
Power Management Policy: Basic Power Management
Power in Use:
Total Power:
Allocated Power (Max):
Remaining Power:
fuelg on page 214
You can display the current health status for the JCS1200 platform to determine if system
components are operating properly. For each component, health status can be:
Ok
Warning
Critical
Display health status for the JCS1200 platform using the JCS management module CLI
command.
health
907
4000
1921
2079
116
4000
800
3200
Copyright © 2010, Juniper Networks, Inc.