CHAPTER 6
Configuring Basic System Parameters
Configuring JCS Management Module Settings
Copyright © 2010, Juniper Networks, Inc.
Configuring JCS Management Module Settings on page 39
Configuring SNMP Traps on page 43
Configuring SSH Access on page 45
Configuring the JCS Switch Module on page 47
You use the JCS management module CLI to configure basic system parameters on the
JCS1200 platform:
Restoring the Default JCS Management Module Configuration on page 40
Configuring the JCS Management Module Ethernet Interface on page 40
Configuring the Switch Module Ethernet Interface on page 41
Configuring User Accounts on page 42
Configuring the NTP Server on page 42
Configuring the Time Zone on page 43
Configuring the System Name and Contact Information on page 43
39