Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 239

fuelg (Display) fuelg (Display)
fuelg (Configure)
Copyright © 2010, Juniper Networks, Inc.
Table 25: fuelg Output Fields (continued)
Field Name
Remaining Power
Power in Use
system> fuelg –T system:mm[1]
Power Domain 1
— — — — — — — —
Status: Power domain status is good.
Modules:
Bay 1: 2000
Bay 2: 2000
Power Budget: 3200
Reserved Power: 400
Remaining Power: 2800
Power in Use: 400
Power Domain 2
— — — — — — — —
Status: Power domain status is good.
Modules:
Bay 3: 1800
Bay 4: 1800
Power Budget: 2880
Reserved Power: 0
Remaining Power: 2880
Power in Use: 0
system> fuelg –T system:mm[1] -qm off
OK
Chapter 16: Summary of JCS Management Module Monitoring Commands
Field Description
Amount of power (in watts) available to the domain (power budget
– reserved power = remaining power).
Amount of power (in watts) currently being used by the power
supplies in the domain.
215