Clearlog - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

clearlog

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clearlog clearlog
Copyright © 2010, Juniper Networks, Inc.
clearlog -T system:mm[x]
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Clear the JCS management module event log to remove
existing events.
-T system:mm[x] —Specify the management module as the target of the command.
Replace with a value of
x 1
supervisor
Clearing the Event Log on page 202
displaylog on page 212
clearlog on page 211
When you enter this command, you are provided feedback on the status of your request.
The command prompt changes to reflect the new command target.
system> clearlog –T system:mm[1]
OK
Chapter 16: Summary of JCS Management Module Monitoring Commands
or .
2
211