Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 101

sshcfg (Display) sshcfg (Display)
sshcfg (Configure)
Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Summary of JCS Management Module Configuration Commands
Table 14: sshcfg Output Fields (continued)
Field Name
ssh-dss
ssh-rsa
x SSH public keys
x Locations
system> sshcfg -T system:mm[1]
-v1 off
-cstatus enabled
CLI SSH port 22
-sstatus disabled
SMASH SSH port 50024
ssh-dss 2048 bit fingerprint: 27:ee:bd:a9:27:28:d8:a5:93:03:3d:8e:77:d0:38:2c
ssh-rsa 2048 bit fingerprint: 66:c9:73:4f:18:11:02:10:f3:05:6e:d7:27:05:a5:01
2 SSH public keys installed
10 locations available to store SSH public keys
system> sshcfg -T system:mm[1] -hk gen -cstatus enabled
OK
Field Description
DSS fingerprint for the SSH server. This fingerprint is used to verify
the authenticity of the server.
RSA fingerprint for the SSH server. This fingerprint is used to verify
the authenticity of the server.
Number of SSH public keys installed.
Number of locations available to store SSH public keys.
77