Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 177

Step-by-Step
Procedure
Results
Copyright © 2010, Juniper Networks, Inc.
}
}
unit 2 {
peer-interface ut-1/0/0.2;
vlan-id 18;
family inet {
address 18.18.18.1/30;
}
}
}
PSD6 Configuration
To configure PSD6:
At the
[edit interfaces]
1.
the physical tunnel interface.
At the
2. [edit interfaces ut-7/0/0]
configure the logical tunnel interface.
At the [edit interfaces ut-1/0/0 unit 0]
3.
ge-6/0/0.logical-unit-number
interfaces together.
At the
[edit interfaces ge-6/0/0]
4.
to match the configuration on the RSD, and the
identify the Gigabit Ethernet interface as the shared physical interface.
At the
[edit interfaces ge-6/0/0]
5.
configure the logical interface.
At the
6. [edit interfaces ge-6/0/0 unit 3]
statements:
peer-interface ut-7/0/0.0
together.
—Bind the 802.1Q VLAN tag ID to the logical interface.
vlan-id 100
family inet address 10.10.10.1/24
family.
Display the results of the configuration:
interfaces {
ut-7/0/0 {
unit 0 {
peer-interface ge-6/0/0.3;
}
}
ge-6/0/0 {
vlan-tagging;
unit 3 {
peer-interface ut-7/0/0.0;
vlan-id 100;
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
statement to bind the tunnel and the Gigabit Ethernet
hierarchy level, include the
shared-interface
hierarchy level, include the
hierarchy level, include the following
—Bind the Gigabit Ethernet and tunnel interfaces
—Configure the IP version 4 (IPv4) suite protocol
Chapter 14: Configuration Examples
statement to configure
ut-7/0/0
statement to
unit 0
peer-interface
statement
vlan-tagging
statement to
statement to
unit 3
153