Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
health
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
health (All)
health (All)
216
health -T target<-l depth> <-f>
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Display the current health status of a device on the
JCS1200 platform.
-T target
—Specify the target of the command. Command targets include:
—JCS management module. Replace
system:mm[x]
system:switch[x]
—JCS switch module. Replace
—JCS Routing Engine (blade). Replace
system:blade[x]
system:power[x]
—JCS power supply. Replace
—JCS fan (blower). Replace
system:blower[x]
—(Optional) Display health status for a hierarchy of devices (starting with the
-l depth
device specified as the command target). Replace
—Health status for the full hierarchy of devices (starting at the command target
2 | all | a
level). You can enter
as an abbreviation for
a
—Health status for the command target only.
1
—(Optional) Display health status and active alerts for the device specified as the
-f
command target.
operator
Displaying System Component Status on page 204
health (All) on page 216
health (Routing Engine) on page 217
health (with Alerts) on page 217
When you enter this command, you are provided feedback on the status of your request.
system> health -l a
mm[1]: OK
mm[2]: OK
blade[1]: OK
blade[2]: OK
blade[3]: OK
blade[4]: OK
blade[5]: Minor
blade[6]: OK
power[1]: OK
power[2]: OK
with a value of
or
x
1
x
with a value of
1
or
2
.
with a value of
x
x
with a value of
1
through
with a value of
through
x
1
depth
with one of the following values:
.
all
Copyright © 2010, Juniper Networks, Inc.
.
2
through
.
1
12
4
.
.
4
Advertisement
Table of Contents
