Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 187

Step-by-Step
Procedure
Results
Step-by-Step
Procedure
Copyright © 2010, Juniper Networks, Inc.
PSD15 Configuration (Route Reflector)
To configure the route reflector (PSD15):
At the [edit interfaces]
1.
internal Ethernet interface.
At the
[edit interfaces fxp0]
2.
the logical interface.
At the
3. [edit interfaces fxp0 unit 1]
statement to configure the IP version 4 (IPv4) suite protocol family.
10.12.100.18/30
At the [edit interfaces]
4.
internal Ethernet interface.
At the
[edit interfaces fxp1]
5.
the logical interface.
At the [edit interfaces fxp1 unit 1]
6.
statement to configure the IPv4 suite protocol family.
10.12.100.14/30
Display the results of the configuration:
interfaces {
fxp0 {
unit 1 {
family inet {
address 10.12.100.18/30;
}
}
}
fxp1 {
unit 1 {
family inet {
address 10.12.100.14/30;
}
}
}
}
PSD11 Configuration (Router 1)
To configure Router 1 (PSD11):
At the [edit interfaces]
1.
the Gigabit Ethernet interface.
At the
2. [edit interfaces ge-1/1/0]
configure the logical interface.
At the [edit interfaces ge-1/1/0 unit 0]
3.
statement to configure the IPv4 suite protocol family.
10.12.100.10/30
At the [edit interfaces]
4.
the internal Ethernet interface.
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
Chapter 14: Configuration Examples
fxp0 statement to configure the
statement to configure
unit 1
family inet address
fxp1 statement to configure the
statement to configure
unit 1
family inet address
ge-1/1/0 statement to configure
statement to
unit 0
family inet address
ge-1/1/1 statement to configure
163