Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
Keeping the JCS Management Module Default SNMP Setting
Related
Documentation
32
CAUTION: By default, SNMP is enabled on the JCS management module.
Do not disable SNMP. If you disable SNMP, your system might not function
correctly. Also, do not erase or change the SNMP default c1 community.
Verifying the FPC BootROM Version on page 31
Configuring SNMP Traps on page 43
Configuration Roadmap on page 33
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
