Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
snmp
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
74
snmp -T system:mm[x] <-cax community-type> <-cx community-name> <-cxin (ip-address
| hostname)> <-cn contact-name> <-l location>
Command supported by Junos OS Release 9.1 and later.
(JCS1200 platform only) Display or configure SNMP settings on the JCS management
module.
—Specify the JCS management module as the target of the command.
-T system:mm[x]
Replace
with a value of
x
1
—(Optional) Specify an SNMPv3 view type for the community. View
-cax community-type
types can be
,
, or
get
set
trap
community number.
-cx community-name
—(Optional) Specify a descriptive name for the community. Replace
with a value of
through
x
1
-cxin (ip-address | hostname)
community. Replace
with a value of
x
Replace
with a value of
n
1
You can specify up to three hosts for each community.
—(Optional) Specify a contact name for the SNMP community host
-cn contact-name
server.
-l location
—(Optional) Specify a location for the SNMP community host server.
operator (display)
supervisor (display or configure)
Configuring SNMP Traps on page 43
alertentries on page 54
monalerts on page 69
snmp (Display) on page 75
snmp (Configure) on page 75
Table 13 on page 74 lists the output fields for the
in the approximate order in which they appear.
Table 13: snmp Output Fields
Field Name
a
or
.
2
. Replace
with a value of
x
to represent the community number.
3
—(Optional) Specify an IP address or hostname for the
through
to represent the community number.
1
3
through
to represent the host ranking (first, second, or third).
3
snmp
Field Description
Status of the SNMP agent (enabled or disabled)
through
to represent the
1
3
command. Output fields are listed
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
