JUNOS 10.4 Protected System Domain Configuration Guide
list
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
list (All)
list (All)
222
list -T target <-l depth>
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) List devices on the JCS1200 platform. This information
is useful for determining how many Routing Engines and JCS management modules are
installed and which JCS management module is primary.
-T target
—Specify a command target. Valid targets for this command include:
—Specify a Routing Engine as the command target. Replace
system:blade[x]
the Routing Engine slot number (
—Specify a JCS fan (blower) as the command target.
system:blower[x]
system:mm[x]
—Specify a JCS management module as the command target. Replace
with the primary management module number (
x
—Specify a JCS power module as the command target. Replace
system:power[x]
with the power module number (
—Specify a JCS switch module as the command target. Replace
system:switch[x]
with the switch number (
If no command target is specified, all devices on the JCS1200 platform are listed.
—(Optional) List a hierarchy of devices (starting with the device specified as the
-l depth
command target). Replace
—List the full hierarchy of devices (starting at the command target level). You
2 | all | a
can enter
as an abbreviation for
a
1
—List the command target only.
operator
Displaying a List of Components on page 205
list (All) on page 222
When you enter this command, you are provided feedback on the status of your request.
system> list -l a
mm[1] primary
mm[2] standby
power[1]
power[2]
power[3]
power[4]
1
through
12
).
1
1
through
4
).
or
).
1
2
with one of the following values:
depth
.
all
x
or
).
2
Copyright © 2010, Juniper Networks, Inc.
with
x
x
Need help?
Do you have a question about the JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN and is the answer not in the manual?
Questions and answers