Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
98
Configure the physical Gigabit Ethernet interface using the
Configure the physical 10-Gigabit Ethernet interface using the
statement.
Configure Frame Relay encapsulation or VLAN tagging:
2.
For Frame Relay encapsulation, use the
the
[edit interfaces so-fpc/pic/slot]
For VLAN tagging, use the
levels:
[edit interfaces ge-fpc/pic/slot]
Identify the physical interface as a shared interface by including the
3.
statement at one of the following hierarchy levels:
[edit interfaces ge-fpc/pic/slot]
NOTE: For Ethernet shared interfaces on the JCS 1200 platform,
gratuitous-arp configuration statements are supported on the Root System
Domain (RSD), but not on the Protected System Domain (PSD). These
statements are configured at the
level. These statements include: gratuitous-arp-reply,
no-gratuitous-arp-replay, and no-gratuitous-arp-request. Values you
configure for gratuitous-arp statements on the RSD are not passed to the
PSD.
Configure logical interfaces under the physical interface using the
4.
statement at one of the following hierarchy levels:
logical-unit-number
so-fpc/pic/slot]
, or
[edit interfaces ge-fpc/pic/slot]
The values for
logical-unit-number
For each logical interface, include the following statements:
5.
For SONET interfaces, include the
so-fpc/pic/slot unit logical-unit-number]
connection identifier (DLCI) for the point-to-point Frame Relay connection between
the RSD and the PSD. The value for
RSD configuration for the specified logical SONET interface.
For Gigabit Ethernet interfaces, include the
following hierarchy levels:
or
[edit interfaces xe-fpc/pic/slot unit logical-unit-number]
identifier tag to the logical interface. The value for
set in the RSD configuration for the specified logical Gigabit Ethernet interface.
For each logical interface, include the
6.
configure the tunnel peer interface that is bound to the logical interface.
For each logical interface, include the
7.
family for the logical interface.
encapsulation frame-relay
hierarchy level.
statement at one of the following hierarchy
vlan-tagging
or
[edit interfaces xe-fpc/pic/slot]
[edit interfaces so-fpc/pic/slot]
, or
[edit interfaces xe-fpc/pic/slot]
[edit interfaces ge-fpc/pic/slot]
, or
[edit interfaces xe-fpc/pic/slot]
must match the values set in the RSD configuration.
dlci dlci-identifier
statement at the
hierarchy level to assign a data-link
must match the value set in the
dlci-identifier
vlan-id number
[edit interfaces ge-fpc/pic/slot unit logical-unit-number]
number
peer-interface interface-name
statement to configure the protocol
family family
Copyright © 2010, Juniper Networks, Inc.
statement.
ge-fpc/pic/slot
xe-fpc/pic/slot
statement at
.
shared-interface
,
.
hierarchy
unit
[edit interfaces
.
[edit interfaces
statement at one of the
to bind an 802.1Q VLAN
must match the value
statement to
Advertisement
Table of Contents
