Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
Results
160
–Slot in which the backup Routing Engine resides.
REB00
is no backup Routing Engine.
PRDT640
—Juniper Networks router product, which is the T640 router.
Configure the Routing Engine that is part of PSD12. This Routing Engine is located
4.
in slot
of the JCS chassis and acts as standalone router (not a route reflector).
3
To configure the Routing Engine in slot 3, issue the following command:
system> baydata -b 03 -data "V01–JCS1–SD1–PSD12–REP03–REB00–PRDT640"
The
command specifies the target as a bay blade (
baydata
(Routing Engine) in slot
—Product version, which is
V01
—JCS platform identifier, which is
JCS1
—RSD identifier, which is
SD1
—PSD identifier, which is
PSD12
—Slot in which the primary Routing Engine resides, which is
REP03
–Slot in which the backup Routing Engine resides.
REB00
is no backup Routing Engine.
—Juniper Networks router product, which is the T640 router.
PRDT640
Configure the Routing Engine that is part of PSD13. This Routing Engine is located
5.
in slot
4
of the JCS chassis and acts as standalone router (not a route reflector).
To configure the Routing Engine in slot 4, issue the following command:
system> baydata -b 04 -data "V01–JCS1–SD1–PSD13–REP04–REB00–PRDT640"
The
baydata
command specifies the target as a bay blade (
(Routing Engine) in slot
—Product version, which is
V01
—JCS platform identifier, which is
JCS1
—RSD identifier, which is
SD1
—PSD identifier, which is
PSD13
—Slot in which the primary Routing Engine resides, which is
REP04
–Slot in which the backup Routing Engine resides.
REB00
is no backup Routing Engine.
PRDT640
—Juniper Networks router product, which is the T640 router.
Display the results of the configuration:
, and specifies the following parameters:
03
.
01
.
1
. This router is in
1
SD1
.
12
, and specifies the following parameters:
04
.
01
.
1
. This router is in
1
SD1
.
13
Copyright © 2010, Juniper Networks, Inc.
indicates that there
00
), identifies the blade
-b
, the route reflector is in
SD2
.
03
indicates that there
00
-b
), identifies the blade
, the route reflector is in
SD2
.
04
indicates that there
00
.
.
Advertisement
Table of Contents
