Table of Contents
Advertisement
monalerts
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Summary of JCS Management Module Configuration Commands
monalerts -T system:mm[x] <-ca (enabled | disabled)> <-ec (enabled | disabled)> <-ia
(enabled | disabled)> <-wa (enabled | disabled)>
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Display or configure alerts monitored by the JCS
management module.
—Specify a JCS management module as the command target. Replace
-T system:mm[x]
with the primary management module number (
x
—(Optional) Enable or disable monitoring of all critical alerts.
-ca (enabled | disabled)
—(Optional) Enable or disable enhanced legacy alert categories.
-ec (enabled | disabled)
When enhanced legacy alert categories are enabled, alerts can be configured using the
monalerts
command.
NOTE: Make sure enhanced legacy alerts are enabled for the JCS1200
platform.
—(Optional) Enable or disable monitoring of all informational
-ia (enabled | disabled)
alerts.
—(Optional) Enable or disable monitoring of all warning alerts.
-wa (enabled | disabled)
operator (display)
supervisor (display or configure)
Configuring SNMP Traps on page 43
alertentries on page 54
snmp on page 74
monalerts (Display) on page 70
monalerts (Configure) on page 70
Table 11 on page 69 lists the output fields for the
listed in the approximate order in which they appear.
Table 11: monalerts Output Fields
Field Name
-ca
or
1
monalerts
Field Description
Status (
enabled
or
disabled
) of critical alert monitoring.
).
2
command. Output fields are
69
Advertisement
Table of Contents
