Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 60

JUNOS 10.4 Protected System Domain Configuration Guide
Related
Documentation
36
Configure the logical tunnel interfaces under the physical interface.
8.
For each logical tunnel interface, specify its peer logical SONET or Ethernet interface.
9.
The logical unit number must be the same as the one that is configured on the logical
tunnel interface.
Configuring JCS Management Module Settings on page 39
Configuring the JCS Switch Module on page 47
Configuring the Routing Engine Parameters (Blade Bay Data) on page 51
Configuring the Routing Engine (Blade) Name on page 52
Configuring an RSD and Creating PSDs on page 84
Configuring a PSD with a Single Routing Engine on page 87
Configuring a PSD with Redundant Routing Engines on page 89
Configuring Shared Interfaces on the RSD on page 95
Configuring Shared Interfaces on a PSD on page 97
Copyright © 2010, Juniper Networks, Inc.