Table of Contents
Advertisement
CHAPTER 5
Configuration Roadmap
Configuration Roadmap
Step One: Configure the JCS1200 Platform
Copyright © 2010, Juniper Networks, Inc.
Configuration Roadmap on page 33
Complete the following tasks to configure the JCS1200 platform and T Series routers:
Step One: Configure the JCS1200 Platform on page 33
Step Two: Configure the T Series Router on page 34
Step Three: Configure Basic System Properties on a New PSD on page 34
Step Four: Configure Shared Interfaces (Optional) on page 35
To configure the JCS1200 platform, log in to the JCS management module command-line
interface (CLI) and:
Configure basic system parameters:
1.
Restore the default configuration on the JCS management module.
Configure the JCS management module Ethernet management interface.
Configure the JCS switch module Ethernet management interface.
Create user accounts.
Configure the NTP server.
Configure the time zone.
Configure the system name and contact information.
Configure Secure Shell (SSH) access.
Configure Simple Network Management Protocol (SNMP) traps.
Configure the JCS switch module.
Configure the Routing Engines (blades) on the JCS1200 platform:
2.
33
Advertisement
Table of Contents
