Configuring The Routing Engine Parameters (Blade Bay Data); Table 5: Format Requirements For Blade Bay Data - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

Configuring the Routing Engine Parameters (Blade Bay Data)

Table 5: Format Requirements for Blade Bay Data

Item
V
JCS
SD
PSD
REP
REB
PRD
Copyright © 2010, Juniper Networks, Inc.
NOTE: After you issue the
return to the previous version of the software, because the running copy and
backup copy of the software are identical.
To pass system configuration information to the Routing Engines on the JCS, you must
configure the blade bay data. Blade bay data is stored as a 60-byte text string that
contains information about how the Routing Engines on the JCS1200 platform are mapped
to PSDs and to the RSD. The blade bay mapping information is passed from the JCS
management module to the appropriate Routing Engine, so that it is available when the
Junos OS boots.
You enter a blade bay data string for each primary and standby Routing Engine on the
JCS chassis.
Blade bay data is entered as a text string with the following format. See Table 5 on
page 51 for details.
Vn-JCSn-SDn-PSDn-REPn-REBn-PRDplatform-type
n is a number.
platform-type
Description
Version number of the blade bay data. The accepted value is
JCS identifier. The range of values is
value set by the
control-system-id
RSD identifier. The range of values is
value set by the
root-domain-id
PSD identifier. Each identifier must be unique. The value range is
must match the value set by the
Junos OS CLI.
Slot identifier of the primary Routing Engine. The value range is
any Junos OS CLI configuration that affects mastership, the Routing Engine in the slot indicated
by REP will boot as the master, and the Routing Engine in slot REB will boot as the backup. The
value for this parameter must match the value set by the
configured through the Junos OS CLI.
Slot identifier of the backup Routing Engine. Typically, the value range is
no backup Routing Engine is installed. In the absence of any Junos OS CLI configuration that
affects mastership, the Routing Engine in the slot indicated REB will boot as the backup.
Routing platform type. The accepted values are
element).
Chapter 7: Configuring the Routing Engines on the JCS1200 Platform
request system snapshot
is the routing platform type (
through . The value for this parameter must match the
01 04
statement configured through the Junos OS CLI.
through . The value for this parameter must match the
01 03
statement configured in the Junos OS CLI.
protected-system-domains
control-slot-numbers
T1600 , T640
command, you cannot
, , or ).
T1600 T640 T320
.
01
- . The value for this parameter
01 31
statement configured through the
through . In the absence of
01 12
statement
01 through 12 . Use
, T320 , or SCE (standalone control
00 if
51