Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
Junos OS Verification Tasks
Table 29: Commands Used to Verify PSD and RSD Status
Items to Check
Hardware ownership
Configured PSDs
Routing Engine information
Ethernet switch statistics
Shared interfaces
Related
Documentation
Displaying Hardware Information
Purpose
Action
On the RSD
238
Table 29 on page 238 lists tasks that are commonly used to verify information that is
specific to RSDs and PSDs.
Description
Display information about
hardware that is owned by the RSD,
owned by the PSD, or shared by
both.
Display PSDs configured under the
RSD.
Display Routing Engine information.
Display information about the
receive and transmit packets
traveling between PSDs and the
respective RSD.
Display information about shared
interfaces.
Configuring an RSD and Creating PSDs on page 84
Configuring Shared Interfaces on the RSD on page 95
Configuring Shared Interfaces on a PSD on page 97
JCS Management Module Verification Tasks on page 199
On the RSD, you can use the
on the T Series router (without reference to which FPCs belong to a particular PSD).
On the PSD, you can display information about the Routing Engines, FPCs, and PICs that
are assigned to the PSD and about hardware that is shared with the RSD, such as Switch
Interface Boards (SIBs), the Switch Processor Mezzanine Board (SPMB), Power Entry
Modules (PEMs), and fans.
Display hardware information using the
The following example provides output from the
from the RSD.
user@rsd> show chassis hardware
show chassis hardware
command to display all hardware
show chassis hardware
show chassis hardware
Copyright © 2010, Juniper Networks, Inc.
Task
"Displaying Hardware Information"
on page 238
"Displaying Configured PSDs" on
page 241
"Displaying Routing Engine
Information" on page 242
"Displaying Ethernet Switch
Statistics" on page 244
"Displaying Shared Interface
Information" on page 245
command.
command issued
Advertisement
Table of Contents
