Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
fuelg
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
214
fuelg -T system:mm[x] <domain> <-qm (off | on)>
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Display or configure power domain information for power
supplies on the JCS1200 platform.
-T system:mm[x]
—Specify the JCS management module as the target of the command.
Replace
with a value of
x
1
domain
—(Optional) Display information for a specific power domain. Replace
with
(power domain
) or
pd1
1
is displayed for both power domains.
The JCS1200 platform has two power domains. Power domain 1 supports all JCS modules
and slots (bays)
1
through
domain
supports slots
2
7
—(Optional) Specify a thermal event response (quiet mode):
-qm (on | off)
—Fans will increase speed to provide additional cooling.
off
—Fans will remain at fixed speed. Power is throttled (for components that support
on
power throttling) to reduce power consumption and heat.
supervisor (configure)
operator (display)
Displaying Power Domain Information on page 203
fuelg (Display) on page 215
fuelg (Configure) on page 215
Table 25 on page 214 lists the output fields for the
in the approximate order in which they appear.
Table 25: fuelg Output Fields
Field Name
Domain Number
Bay x
Power Budget
Reserved Power
or
.
2
(power domain
). By default, power domain information
pd2
2
6
. Power domain 1 uses power supply modules
through
and uses power supply modules
12
fuelg
Field Description
Status information for the power domain (power domain
domain
).
2
Bay (slot) number and power value (in watts) for the power supply.
Total amount of power (in watts) allocated to the domain.
Amount of power (in watts) held in reserve.
domain
1
and
2
and
.
3
4
command. Output fields are listed
or power
1
Copyright © 2010, Juniper Networks, Inc.
. Power
Advertisement
Table of Contents
