Configuring A Managed Host; Assigning A Component To A Host - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Administration Manual
Strm log management administration guide
Hide thumbs
Also See for SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1:
Table of Contents
Advertisement
72
U
D
SING THE
EPLOYMENT
Configuring a
Managed Host
Step 1
Step 2
Step 3
Assigning a
Component to a Host
Step 1
Step 2
Step 3
Step 4
E
DITOR
To configure a managed host:
From the System View, use the right mouse button (right-click) on the managed
host you wish to configure and select Configure.
The Configure host window appears.
Enter values for the parameters:
Minimum port allowed - Specify the minimum port for which you wish to
•
establish communications.
Maximum port allowed - Specify the maximum port for which you wish to
•
establish communications.
Ports to exclude - Specify the port you wish to exclude from communications.
•
You can enter multiple ports you wish to exclude. Separate multiple ports using
a comma.
Click Save.
You can assign the STRM Log Management components added in the Event
Views to the managed hosts in your deployment. This section provides information
on assigning a component to a host using the System View, however, you can also
assign components to a host in the Event Views.
To assign a host:
Click the System View tab.
From the Managed Host list, select the managed host to which you wish to assign
a STRM Log Management component.
The System View of the host appears.
Select the component you wish to assign to a managed host.
From the menu, select Actions > Assign.
Note: You can also use the right mouse button (right-click) to access the Actions
menu items.
The Assign Component wizard appears.
STRM Log Management Administration Guide
Advertisement
Table of Contents
