JUNOS 10.4 Protected System Domain Configuration Guide
history
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
history (Listing)
history (Listing)
history (Reentering a
Command)
218
history
<!n>
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Display the last eight commands entered. You can use
this list to reenter commands. To reenter a command, use the
a list of recent commands, then type an exclamation point (!) followed by the number
of the command you wish to reenter.
!n
—(Optional) Reenter a command from the history list. Replace
through
to indicate the number of the command you wish to reenter.
7
operator
JCS1200 Software Components on page 23
history (Listing) on page 218
history (Reentering a Command) on page 218
When you enter this command, you are provided feedback on the status of your request.
system:mm[1]> history
0 dns
1 dns —on
2 dns
3 dns —i1 192.168.70.29
4 dns
5 dns —i1 192.168.70.29 —on
6 dns
7 history
system:mm[1]> !2
Enabled
-i1 192.168.70.29
-12 0.0.0.0
-i3 0.0.0.0
history
command to display
n
with a value of
Copyright © 2010, Juniper Networks, Inc.
0