Control-Slot-Numbers - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

Protected system domain configuration
Table of Contents

Advertisement

JUNOS 10.4 Protected System Domain Configuration Guide

control-slot-numbers

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
114
control-slot-numbers [ slot-numbers ];
[edit chassis system-domains protected-system-domains psdn]
Statement introduced in Junos OS Release 9.1.
Configure the slot numbers for the Routing Engines on the JCS1200 platform that are
part of the specified Protected System Domain (PSD).
slot-numbers
—Slot numbers for the Routing Engines on the JCS1200 platform to be
assigned to the PSD.
Range:
through
1
12
NOTE: The slot numbers for the Routing Engines for the specified PSD must
match the
Engine) values set through the JCS management module
command. In the absence of any Junos OS CLI configuration that affects
mastership, the Routing Engine in the slot indicated by REP will boot as
the master, and the Routing Engine in slot REB will boot as the backup.
The
command assigns the corresponding PSD through the
baydata
parameter.
view-level—To view this statement in the configuration.
control-level—To add this statement to the configuration.
Configuring an RSD and Creating PSDs on page 84
baydata on page 56
REP
(primary Routing Engine) and
REB
(backup Routing
baydata
PSD
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents