Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 186

JUNOS 10.4 Protected System Domain Configuration Guide
Results
162
At the
7. [edit chassis system-domains]
protected-system-domains psd13
At the [edit chassis system-domains protected-system-domains psd13]
8.
level:
a. Include the
description "bcgcpu4 SWLab R3"
b. Include the fpcs 0
c. Include the
control-system-id 1
d. Include the
control-slot-numbers 4
slot 4 in the JCS chassis to PSD13.
Display the results of the configuration:
chassis {
system-domains {
root-domain-id 1;
protected-system-domains {
psd11 {
description "bcgcpu2 SWLab R1";
fpcs 1;
control-system-id 1;
control-slot-numbers 2;
}
psd12 {
description "bcgcpu3 SWLab R2";
fpcs 2;
control-system-id 1;
control-slot-numbers 3;
}
psd13 {
description "bcgcpu4 SWLab R3";
fpcs 0;
control-system-id 1;
control-slot-numbers 4;
}
}
}
}
The RSD configuration on the T640 router does not include a
for domain 2 (the route reflector domain) or any
statements for the route reflector PSD. This is because the route reflector is self-contained
within the JCS chassis and does not require configuration on the T640 router.
hierarchy level, include the
statement to create PSD13.
statement to assign the FPC in slot 0 to PSD13.
statement to identify the JCS1200 platform.
statement to assign the Routing Engine in
protected-system-domains PSD15
hierarchy
statement to describe the PSD.
root-domain-id 2 statement
Copyright © 2010, Juniper Networks, Inc.