Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 175

Step-by-Step
Procedure
Copyright © 2010, Juniper Networks, Inc.
control-system-id 1;
control-slot-numbers 7;
control-plane-bandwidth-percent 50;
}
}
}
}
interfaces {
ge-6/0/0 {
vlan-tagging;
unit 0 {
interface-shared-with psd5;
vlan-id 16;
}
unit 1 {
interface-shared-with psd5;
vlan-id 17;
}
unit 2 {
interface-shared-with psd5;
vlan-id 18;
}
unit 3 {
interface-shared-with psd6;
vlan-id 100;
}
}
PSD5 Configuration
To configure PSD5:
At the
1. [edit interfaces]
the physical tunnel interface.
At the [edit interfaces ut-1/0/0]
2.
statements to configure the logical tunnel interfaces.
At the
3. [edit interfaces ut-1/0/0 unit n]
ge-6/0/0.logical-unit-number
interfaces together. Use the following
For unit 0, the value is
For unit 1, the value is
For unit 2, the value is
At the [edit interfaces ge-6/0/0]
4.
to match the configuration on the RSD, and the
identify the physical interface as the shared interface.
At the [edit interfaces ge-6/0/0]
5.
statements to configure logical interfaces.
At the [
edit interfaces ge-6/0/0 unit n
6.
statements:
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
statement to bind the tunnel and Gigabit Ethernet
logical-unit-number
.
0
1 .
.
2
hierarchy level, include the
shared-interface
hierarchy level, include
] hierarchy level, include the following
Chapter 14: Configuration Examples
statement to configure
ut-1/0/0
unit 0 , unit 1 , and
peer-interface
values:
vlan-tagging statement
statement to
unit 0 , unit 1 , and unit 2
unit 2
151