Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
Related
Documentation
Displaying Temperature Information
Purpose
Action
206
power[3]
power[4]
blower[1]
blower[2]
blower[3]
blower[4]
switch[1]
switch[2]
blade[1]
bcgcpu1
sp
cpu[1]
blade[3]
bcgcpu3
sp
cpu[1]
blade[4]
bcgcpu4
sp
cpu[1]
blade[5]
bcgcpu5
sp
cpu[1]
blade[6]
bcgcpu6
sp
cpu[1]
mt[1]
mt[2]
tap
mux[1]
mux[2]
In this example, two management modules (
management module. There are also four power supplies (
(
), and two JCS switch modules (
blowers
and two media trays (
).
mt
JCS1200 Platform Hardware Components on page 21
list on page 222
You can display temperature information for components in the JCS chassis. This
information is useful for viewing current temperature values and temperature threshold
settings.
Display temperature information (in degrees Fahrenheit) for components in the JCS
chassis using the JCS CLI
temps
The following sample output appears when temperature information is displayed for a
JCS management module:
system> temps –T mm[1]
Warning
Component
Value
Warning
) are installed and
mm
). There are six Routing Engines (
switch
command.
Reset
Hysteresis
Copyright © 2010, Juniper Networks, Inc.
is the primary
mm[1]
power
), four fan assemblies
blade
)
Advertisement
Table of Contents
