Table of Contents
Advertisement
mt
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
mt (Configure)
mt (Configure)
mt (Display)
Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Summary of JCS Management Module Configuration Commands
mt -T system <-b n>
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Configure or display the Routing Engine (blade) that is
in control of the JCS media tray (mt). You can use the media tray to copy Junos OS from
a USB device to a Routing Engine installed in the JCS chassis.
-T system
—Display the media tray owner.
—(Optional) Configure which Routing Engine controls (owns) the media tray. Replace
-b n
n
with a value of
1
through
you want to assign control of the media tray.
operator (display)
supervisor (display or configure)
Troubleshooting a Routing Engine on the JCS1200 Platform on page 253
mt (Configure) on page 71
mt (Display) on page 71
When you enter this command, you are provided feedback on the status of your request.
system:mm[1]> mt -T system —b 12
OK
system:mm[1]> mt -T system
-b 12
12
to indicate the slot number of the Routing Engine to which
71
Advertisement
Table of Contents
