Table 20: T1600 Router Configuration - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

Results
Step-by-Step
Procedure
Copyright © 2010, Juniper Networks, Inc.
At the
6. [edit chassis system-domains]
protected-system-domains psd4
At the [edit chassis system-domains protected-system-domains psd4]
7.
level:
a. Include the
fpcs 4 fpcs 5 fpcs 6 fpcs 7
6, and 7 to PSD4.
b. Include the
control-system-id 1
c. Include the
control-slot-numbers 7 control-slot-numbers 8
the Routing Engines in slots 7 and 8 in the JCS chassis to PSD4.
Display the configuration results:
system-domains {
root-domain-id 2;
protected-system-domains {
psd3 {
description "psd for customer3";
fpcs [ 0 1 2 3];
control-system-id 1;
control-slot-numbers [ 5 6 ];
}
psd4 {
description "psd for customer4";
fpcs [ 4 5 6 7];
control-system-id 1;
control-slot-numbers [ 7 8 ];
}
}
}
T1600 Router Configuration
To configure the RSD and create the PSDs on the T1600 router:
Log in to the T1600 router.
1.
Configure RSD3 and the parameters specified in Table 20 on page 133.
2.

Table 20: T1600 Router Configuration

PSD FPCs
5 0, 1, 2, and 3
6 4, 5, 6, and 7
At the
3. [edit chassis system-domains]
the
root-domain-id 3
At the
4. [edit chassis system-domains]
protected-system-domains psd5
hierarchy level, include the
statement to create PSD4.
statement to assign the FPCs in slots 4, 5,
statement to identify the JCS1200 platform.
Redundant Routing Engine Slots
9 and 10
11 and 12
hierarchy level of the Junos OS CLI, include
statement to identify the RSD.
hierarchy level, include the
statement to create PSD5.
Chapter 14: Configuration Examples
hierarchy
statement to assign
133