Table of Contents
Advertisement
Related
Documentation
Displaying a List of Components
Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
The following sample output appears when health status is displayed for all components
installed in the JCS1200 platform:
system> health —l a
OK
mm[1]
:
mm[2]
:
blade[1]
:
blade[2]
:
blade[3]
:
blade[4]
:
blade[5]
:
blade[6]
:
power[1]
:
power[2]
:
power[3]
:
power[4]
:
blower[1] :
blower[2] :
blower[3] :
blower[4] :
switch[1] :
switch[2] :
The following sample output appears when health status is displayed for a JCS Routing
Engine:
system> health -l –a T system:blade[5]
system: Minor
blade[5]:Minor
5V over voltage
CPU1 temperature warning
In this example, a minor warning appears for the Routing Engine in slot 5. The voltage
level has risen, causing a temperature increase.
health on page 216
You can display a list of components included in the JCS chassis. This information is
useful for determining how many Routing Engines and management modules are installed
and which management module is primary.
Display a list of components in the JCS chassis using the JCS management module CLI
command.
list
The following sample output appears when the list is displayed for all components
installed in the JCS chassis:
system> list —l a
system
mm[1]
primary
mm[2]
standby
power[1]
power[2]
Chapter 15: Managing the JCS1200 Platform
OK
OK
OK
OK
OK
OK
Minor
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
205
Advertisement
Table of Contents
