Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 188

JUNOS 10.4 Protected System Domain Configuration Guide
Results
Step-by-Step
Procedure
164
At the
5. [edit interfaces ge-1/1/1]
configure the logical interface.
At the [edit interfaces ge-1/1/1 unit 0]
6.
statement to configure the IPv4 suite protocol family.
10.12.100.6/30
Display the results of the configuration:
interfaces {
ge-1/1/0 {
unit 0 {
family inet {
address 10.12.100.10/30;
}
}
}
ge-1/1/1 {
unit 0 {
family inet {
address 10.12.100.6/30;
}
}
}
}
PSD12 Configuration (Router 2)
To configure Router 2 (PSD12):
At the
[edit interfaces]
1.
the Gigabit Ethernet interface.
At the
2. [edit interfaces ge-2/0/1]
configure the logical interface.
At the
[edit interfaces ge-2/0/1 unit 0]
3.
10.12.100.13/30 statement to configure the IPv4 suite protocol family.
At the
[edit interfaces]
4.
the internal Ethernet interface.
At the [edit interfaces ge-2/0/2]
5.
configure the logical interface.
At the
[edit interfaces ge-2/0/2 unit 0]
6.
10.12.100.5/30 statement to configure the IPv4 suite protocol family.
At the
[edit interfaces]
7.
the internal Ethernet interface.
At the [edit interfaces ge-2/0/3]
8.
configure the logical interface.
At the
[edit interfaces ge-2/0/3 unit 0]
9.
10.12.100.1/30 statement to configure the IPv4 suite protocol family.
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
statement to
unit 0
family inet address
statement to configure
ge-2/0/1
statement to
unit 0
family inet address
statement to configure
ge-2/0/2
unit 0 statement to
family inet address
statement to configure
ge-2/0/3
unit 0 statement to
family inet address
Copyright © 2010, Juniper Networks, Inc.