Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
Results
180
a. To configure the Routing Engine in slot 5, issue the following command:
system> baydata —b 05 —data "V01–JCS01–SD01–PSD02–REP05–REB06–PRDT640"
OK
The
baydata
command specifies the target as a bay blade (
blade (Routing Engine) in slot
V01
—Product version. Junos OS Release 9.1 supports only the value of
—JCS platform identifier of 01. Junos OS Release 9.1 supports only the
JCS01
value of
.
01
—RSD identifier, which is
SD01
–PSD identifier, which is
PSD02
—Slot in which the primary (or master) Routing Engine resides, which
REP05
is
.
05
REB06
—Slot in which the backup Routing Engine resides, which is
—Juniper Networks router product, which is a T640 router.
PRDT640
b. To configure the Routing Engine in slot 6, issue the following command:
system> baydata —b 06 —data "V01–JCS01–SD01–PSD02–REP05–REB06–PRDT640"
OK
The
baydata
command specifies the target as a bay blade (
blade (Routing Engine) in slot
—Product version, which is
V01
—JCS platform identifier, which is
JCS01
—RSD identifier, which is
SD01
–PSD identifier, which is
PSD02
REP05
—Slot in which the primary (or master) Routing Engine resides, which
is
.
05
—Slot in which the backup Routing Engine resides, which is
REB06
—Juniper Networks router product, which is a T640 router.
PRDT640
Display the results of the configuration:
system> baydata
Bay
Status
Definition
1
No blade present
2
No blade present
3
No blade present
4
Supported
V01-JCS01-SD01-PSD01-REP04-REB00-PRDT640
, and specifies the following parameters:
05
.
01
.
02
, and specifies the following parameters:
06
.
01
.
01
.
01
.
02
Copyright © 2010, Juniper Networks, Inc.
-b
), identifies the
01
.
06
.
-b
), identifies the
.
06
Advertisement
Table of Contents
