Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 166

JUNOS 10.4 Protected System Domain Configuration Guide
Step-by-Step
Procedure
142
}
unit 2 {
peer-interface so-6/0/0.2;
}
}
so-6/0/0 {
encapsulation frame-relay;
shared-interface;
unit 0 {
peer-interface ut-1/0/0.0;
dlci 16;
family inet {
address 10.70.0.1/30;
}
}
unit 1 {
peer-interface ut-1/0/0.1;
dlci 17;
family inet {
address 17.17.17.1/30;
}
}
unit 2 {
peer-interface ut-1/0/0.2;
dlci 18;
family inet {
address 18.18.18.1/30;
}
}
}
PSD6 Configuration
To configure PSD6:
At the [edit interfaces]
1.
the physical tunnel interface.
At the
[edit interfaces ut-7/0/0]
2.
configure the logical tunnel interface.
At the [edit interfaces ut-1/0/0 unit 0]
3.
so-6/0/0.logical-unit-number
together.
At the [edit interfaces so-6/0/0]
4.
statement to match the configuration on the RSD, and the
frame-relay
statement to identify the SONET interface as the shared physical
shared-interface
interface.
At the
5. [edit interfaces so-6/0/0]
configure the logical interface.
At the
[edit interfaces so-6/0/0 unit 3]
6.
statements:
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the
statement to bind the tunnel and the SONET interfaces
hierarchy level, include the
hierarchy level, include the
hierarchy level, include the following
ut-7/0/0 statement to configure
statement to
unit 0
peer-interface
encapsulation
statement to
unit 3
Copyright © 2010, Juniper Networks, Inc.