Table of Contents
Advertisement
Configuring Monitored Alerts for SNMP Traps
Related
Documentation
Configuring SSH Access
Copyright © 2010, Juniper Networks, Inc.
In addition to specifying alert recipients for SNMP notifications, you can configure
particular enhanced alert categories (monitored alerts), which enable you to selectively
choose alerts.
To configure monitored alerts:
Log in to the JCS management module.
1.
Use the
command to specify
2.
env
system> env —T mm[1]
Use the
command to configure the monitored alerts. For example:
monalerts
3.
system:mm[1]> monalerts —ec enabled
system:mm[1]> monalerts —ca enabled, —wa enabled —ia enabled
In this example, the enhanced alert categories are enabled. All critical (
(
), and informational (
wa
alertentries on page 54
env on page 62
monalerts on page 69
snmp on page 74
Secure Shell, or SSH, is a network protocol that allows data to be exchanged over a
secure channel between two systems. This section describes how to use JCS commands
to configure SSH access to the JCS1200 platform.
Tasks to configure SSH include:
Generating the Host Key on page 46
Adding the User Public Key on page 46
Chapter 6: Configuring Basic System Parameters
as the configuration target. For example:
mm[1]
) alerts are enabled.
ia
), warning
ca
45
Advertisement
Table of Contents
