Restarting A Routing Engine On The Jcs1200 Platform - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

JUNOS 10.4 Protected System Domain Configuration Guide
Related
Documentation

Restarting a Routing Engine on the JCS1200 Platform

Problem
Solution
254
To restart the Routing Engine and begin loading the software, issue the following
4.
command:
system> reset -T blade[1]
Type and press Enter when the system issues the following prompt during the console
5. y
session on the Routing Engine:
WARNING: The installation will erase the contents of your disks. Do you
wish to continue (y/n)?
When the system issues the following prompt on the console port session:
6.
Eject the installation media and Hit [Enter] to reboot?
a. Using the JCS management module, issue the following command to deselect the
media tray:
system> mt -b 0
b. On the console port session on the Routing Engine, press Enter to reboot the system.
When the system has rebooted, log in as
7.
Amnesiac (ttyd0)
Login: root
You can now load an existing configuration file onto the Routing Engine or configure
8.
the system with basic system properties.
Configuring a PSD with a Single Routing Engine on page 87
Configuring a PSD with Redundant Routing Engines on page 89
A Routing Engine on the JCS1200 Platform is not responding.
Manually restart the Routing Engine.
From the PSD, you can use the
command) in the Junos OS CLI to restart the Routing Engine. For example:
jcs-control
user@host> restart chassis-control gracefully
From the JCS management module, you can use the
management module CLI to restart the Routing Engine. For example:
system> reset -T blade[1]
with no password:
root
restart chassis-control command (or the
reset
Copyright © 2010, Juniper Networks, Inc.
restart
command in the JCS