Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual page 205

Step-by-Step
Procedure
Copyright © 2010, Juniper Networks, Inc.
5 Supported V01-JCS01-SD01-PSD02-REP05-REB06-PRDT640
6 Supported V01-JCS01-SD01-PSD02-REP05-REB06-PRDT640
7 No blade present
8 No blade present
9 No blade present
10 No blade present
11 No blade present
12 No blade present
RSD Configuration
To configure the RSD and create the PSDs on the master Routing Engine in the T640
router:
At the
1. [edit chassis system-domains]
the
root-domain-id 1
At the [edit chassis system-domains]
2.
protected-system-domains psd1
At the [edit chassis system-domains protected-system-domains psd1]
3.
level:
a. Include the
fpcs 4
b. Include the control-system-id 1
c. Include the
control-slot-numbers 4
slot 4 in the JCS chassis to PSD1.
At the [edit chassis system-domains]
4.
protected-system-domains psd2
At the
[edit chassis system-domains protected-system-domains psd2]
5.
level:
a. Include the
fpcs 5
b. Include the control-system-id 1
c. Include the
control-slot-numbers 5 control-slot-numbers 6
the Routing Engines in slot 5 and slot 6 in the JCS chassis to PSD2.
hierarchy level of the Junos OS CLI, include
statement to identify the RSD.
hierarchy level, include the
statement to create PSD1.
statement to assign the FPC in slot 4 to PSD1.
statement to identify the JCS1200 platform.
statement to assign the Routing Engine in
hierarchy level, include the
statement to create PSD2.
statement to assign the FPC in slot 5 to PSD2.
statement to identify the JCS1200 platform.
Chapter 14: Configuration Examples
hierarchy
hierarchy
statement to assign
181