Table of Contents
Advertisement
CHAPTER 11
Configuring Shared Interfaces
Interfaces Hierarchy
Copyright © 2010, Juniper Networks, Inc.
Interfaces Hierarchy on page 93
Configuring Shared Interfaces on page 94
To configure shared interfaces, you must be familiar with the
in the Junos configuration command-line interface (CLI).
Configuration statements that are unique to shared interfaces are:
at the
shared-interface
[edit interfaces so-fpc/pic/slot]
and
[edit interfaces xe-fpc/pic/slot]
at the
interface-shared-with
[edit interfaces ge-fpc/pic/slot unit logical unit-number]
xe-fpc/pic/slot unit logical unit-number]
For detailed information about all other configuration statements under the
hierarchy, see the Junos OS Network Interfaces Configuration Guide.
interfaces]
interfaces {
ge-fpc/pic/slot {
vlan-tagging;
shared-interface;
unit logical-unit-number {
vlan-id number;
peer-interface interface-name;
interface-shared-with psdn;
family family {
address ip-address;
}
}
}
so-fpc/pic/slot {
encapsulation frame-relay;
shared-interface;
unit logical-unit-number {
dlci dlci-identifier;
peer-interface interface-name;
interface-shared-with psdn;
,
[edit interfaces ge-fpc/pic/slot]
hierarchy levels
[edit interfaces so-fpc/pic/slot unit logical unit-number]
hierarchy levels
hierarchy
[edit interfaces]
, and
[edit interfaces
[edit
,
,
93
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN and is the answer not in the manual?
Questions and answers