Boot - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

JUNOS 10.4 Protected System Domain Configuration Guide

boot

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
boot boot
210
boot -T system:blade[x]
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Perform an immediate reset and restart of a specified
Routing Engine (blade).
-T system:blade[x] —Specify the Routing Engine to boot. Replace
Engine slot number ( through
1
supervisor
power on page 224
boot on page 210
When you enter this command, you are provided feedback on the status of your request.
system> boot –T system:blade[10]
OK
).
12
Copyright © 2010, Juniper Networks, Inc.
x with the Routing