Table of Contents
Advertisement
Step-by-Step
Procedure
Copyright © 2010, Juniper Networks, Inc.
PSD15 Configuration (Route Reflector) on page 163
PSD11 Configuration (Router 1) on page 163
PSD12 Configuration (Router 2) on page 164
PSD13 Configuration (Router 3) on page 165
JCS1200 Configuration
To configure the parameters required for Routing Engines in the JCS chassis:
Log in to the JCS management module CLI.
1.
Configure the Routing Engine that is part of PSD15. This Routing Engine is located
2.
in slot
1
of the JCS chassis and acts as the route reflector.
To configure the Routing Engine in slot 1, issue the following command:
system> baydata -b 01 -data "V01–JCS1–SD2–PSD15–REP01–REB00–PRDSCE"
The
baydata
command specifies the target as a bay blade (
Engine (blade) in slot
—Product version, which is
V01
JCS1
—JCS platform identifier, which is
—RSD identifier, which is
SD2
—PSD identifier, which is
PSD15
—Slot in which the primary Routing Engine resides, which is
REP01
—Slot in which the backup Routing Engine resides.
REB00
is no backup Routing Engine.
PRDSCE
—Juniper Networks router product. There is a special product type for
the route reflector: Standalone Control Element (
Configure the Routing Engine that is part of PSD11 This Routing Engine is located in
3.
slot
2
of the JCS chassis and acts as standalone router (not a route reflector).
To configure the Routing Engine in slot 2, issue the following command:
system> baydata -b 02 -data "V01–JCS1–SD1–PSD11–REP02–REB00–PRDT640"
The
command specifies the target as a bay blade (
baydata
(Routing Engine) in slot
—Product version, which is
V01
JCS1
—JCS platform identifier, which is
—RSD identifier, which is
SD1
PSD11
—PSD identifier, which is
—Slot in which the primary Routing Engine resides, which is
REP02
, and specifies the following parameters:
01
.
01
1
.
.
2
.
15
02
, and specifies the following parameters:
.
01
1
.
. This router is in
1
11
.
Chapter 14: Configuration Examples
-b
), identifies the Routing
.
01
indicates that there
00
).
SCE
), identifies the blade
-b
, the route reflector is in
SD1
.
02
.
SD2
159
Advertisement
Table of Contents
