Clock - Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual

clock

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clock (Display) clock (Display)
clock (Configure)
Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Summary of JCS Management Module Configuration Commands
clock <-d date> <-dst dst-mode> <-g offset> <-t time> -T system:mm[x]
Command supported by Junos OS Release 9.1 and later.
(JCS management module CLI) Display or configure the JCS management module clock
settings.
-d date —(Optional) Current calendar date in
—(Optional) Daylight saving mode for the clock. Choices include:
-dst dst-mode
off—Daylight saving time is off (Standard time)
uc—United States and Canada
others—Nonstandard daylight saving time (outside the United States and Canada)
—(Optional) UTC (GMT) offset, in hours. Replace
-g offset
.
+12
—(Optional) Current time in 24–hour
-t time
—Specify the JCS management module as the target of the command.
-T system:mm[x]
Replace with a value of
x 1
operator (display)
supervisor (display or configure)
Configuring the Time Zone on page 43
clock (Display) on page 59
clock (Configure) on page 59
When you enter this command, you are provide with feedback on the status of your
request.
system> clock –T system:mm[1]
03/31/2008 16:27:11 GMT+5:00 dst uc
system> clock -d 04/01/2008 -t 22:12:04 dst uc –T system:mm[1]
OK
mm/dd/yyyy
hh:mm:ss
or .
2
format.
with a value from
offset
format.
to
-12
59