Table of Contents
Advertisement
JUNOS 10.4 Protected System Domain Configuration Guide
Displaying Ethernet Switch Statistics
Purpose
Action
244
On the PSD, display information about receive and transmit packets traveling between
the RSD and the PSDs configured under it.
Display information about receive and transmit packets traveling between all PSDs and
the RSD using the
show chassis ethernet-switch
output:
INT6
provides the internal connection between the master Routing Engine in slot 6
and the JCS switch module.
provides the connection between each JCS switch module (
EXT1
) and the RSD.
switch[2]
provides the connection between each JCS switch module (
EXT6
) and the management ports on each Routing Engine in the JCS chassis.
switch[2]
user@psd2>show chassis ethernet-switch statistics
Statistics for switch[1] port INT6 connected to fpx0:
TX Octets
TX Unicast Packets
TX Multicast Packets
TX Broadcast Packets
Tx Discards
TX Errors
RX Octets
RX Unicast Packets
RX Multicast Packets
RX Broadcast Packets
RX Discards
RX Errors
RX Unknown Protocol
Link State Changes
Statistics for switch[1] port EXT1 connected to RSD 1:
TX Octets
TX Unicast Packets
TX Multicast Packets
TX Broadcast Packets
Tx Discards
TX Errors
RX Octets
RX Unicast Packets
RX Multicast Packets
RX Broadcast Packets
RX Discards
RX Errors
RX Unknown Protocol
Link State Changes
Statistics for switch[1] port EXT6 connected to external management:
TX Octets
TX Unicast Packets
TX Multicast Packets
TX Broadcast Packets
Tx Discards
TX Errors
RX Octets
RX Unicast Packets
command. In the following sample
2414932908
234884638
2179608
30225643
0
0
3670528590
27854646
19553
2236775
5555
0
0
227
3469030805
27012653
553853
5436256
0
0
3442186319
38311288
96
8627909
9
54
0
121
642418689
6759043
19307
4187
0
0
4028111190
209472631
Copyright © 2010, Juniper Networks, Inc.
and
switch[1]
and
switch[1]
Advertisement
Table of Contents
