Setting Up Store And Forward - NEC DSX Software Manual

Central Office Calls, Placing
Setting Up Transmit and Receive Gain
While on an outside call, is a user's conversation transmitted to the caller at a comfortable
1.
level?
1. If yes, leave 3103-01: Transmit Gain (page 814) for the line at it's current value.
2. If no, in 3103-01: Transmit Gain (page 814) adjust the line's transmit gain as required.
2. While on an outside call, is the conversation received by the user at a comfortable level?
If yes, leave 3103-02: Receive Gain (page 814) for the line at it's current value.
1.
2. If no, in 3103-02: Receive Gain (page 814) adjust the line's receive gain as required.
- For a "hot" (high gain) line, decreasing the receive gain should improve Handsfree performance for

Setting Up Store and Forward

1. Should the system use Store and Forward when placing outside calls?
1. If yes:
- In 3111-05: Store and Forward (page 818), enter Yes for every line in the Line Group accessed by
- When Store and Forward is outdialing on DTMF lines, it uses the following settings:
- When Store and Forward is outdialing on analog Dial Pulse lines, it uses the following settings:
- When Store and Forward is outdialing on T1 Dial Pulse lines, it uses the following settings:
- The setting of 1602-01: Interdigit Timer (page 671) determines the interval the system waits, after
If no, in 3111-05: Store and Forward (page 818) enter No .
2.
82 ◆ Features
keysets using that line.
Store and Forward.
1111-03: Speed Dial DTMF Tone On (page 608)
1111-04: Speed Dial DTMF Tone Off (page 610)
1612-01: DP Break Timer (page 685)
1612-02: DP Make Timer (page 685)
1612-03: DP Interdigit Timer (page 685)
1632-01: Transmit Dial Pulse Break Timer (page 698)
1632-02: Transmit Dial Pulse Make Timer (page 698)
1632-03: Transmit Dial Pulse Interdigit Timer (page 698)
the user has dialed their last digit, before dialing the call on the selected line.
DSX Software Manual