NEC DSX Software Manual page 954

90xx-Utilities
902x-Copy
9022-Line Copy
To copy data from a line to another line or range of lines:
1. Access option 9022-01. You see:
Press HOLD and select the option (01-12) corresponding to the line program you want to copy.
2.
• You can dial the option number (01-23) or press Volume Up and Volume Down to scroll through the selections.
3. Press HOLD . You see:
Enter the source line number + HOLD . You see:
4.
• This is the line from which the data will be copied.
Enter the target line number + HOLD . You see:
5.
• This is the line to which the data will be copied.
• If you are copying data to a range of lines, this is the first (lowest) line in the range.
6. Do one of the following.
a. If copying data to a single line, re-enter the line you entered in step 5 above + HOLD .
b. If copying data to a range of lines, enter the highest (last) line in the range + HOLD .
7. When the copy has successfully completed, you see:
924 ◆ Maintenance Options: 9001-9211
Using 9022-01: Line Copy
Copy Program
From Line
To Line
Thru Line
Copy Complete
DSX Software Manual