To Back Up Or Restore The Setting Data Of Terminal; To Back Up The Setting Data Of Terminal - NEC Univerge SV9500 User Manual

CHECK POINTS
Check whether the
download file is placed
in the folder of the
server or not.
Check if the file name
you entered is match
with that stored in
FTP/TFTP/HTTPS
server.
Check whether IP
address/address (URI)
of FTP/TFTP/HTTPS
server is correct or not.
Check whether the
power to
FTP/TFTP/HTTPS
server and network
equipment is ON or
not.
Check whether the
LAN cable is
connected securely.
If the retry of downloading fails many
times, the terminal may be in failure.
For details, please contact the system
administrator.
Other than above conditions, if
"Download Failed!" or "Upload Failed!"
is displayed, please contact the system
administrator.
ACTIONS
Place the download
file in the specified
folder of the server.
Enter the correct file
name which is stored
in FTP/TFTP/HTTPS
server.
Set the proper IP
address/address(URI)
of FTP/TFTP/HTTPS
server.
Turn on the power.
Reconnect the cable
securely.
TO BACK UP OR RESTORE THE
SETTING DATA OF TERMINAL
This section explains how to make a backup of the
setting data which has been entered in the terminal
to FTP/TFTP/HTTPS server. The data in
FTP/TFTP/HTTPS server can be also restored to
the terminal.
When downloading these files, the
terminal needs to be connected to the
network that has FTP, TFTP or HTTPS
server.
For details about FTP/TFTP/HTTPS
service, please contact the system
administrator
TO BACK UP THE SETTING DATA OF
TERMINAL
1.
Display the Menu screen, and select "Settings"
2.
Select " 3 Data Backup/Restore".
3.
Select " 4 Protocol"
4.
Select a Protocol type of the server which stores
the Backup file.
5.
According to the selection in [Protocol] screen,
proceed to the following steps below.
6.
Display the Menu screen, and select "Settings"
When " 1 FTP" is selected here, goto 7

 When " 2 TFTP" is selected here, goto
15
 When " 3 HTTPS" is selected here, goto
7
7.
Select " 5 Account Settings"
8.
Select " 1 User ID"
30
TERMINAL SETUP