NEC DSX Software Manual page 350

Speed Dial
Programming and Dialing Personal Speed Dial
b. Enter the Line Group number you want the system to use when dialing your stored number (90-98).
c. Press INTERCOM if you want to enter Intercom codes.
Press HOLD .
6.
Enter the number you want to store (up to 32 digits long).
7.
• If storing Intercom codes, you can enter a valid dial sequence using the digits 0-9, #, and *.
• To insert a pause, press MUTE . To insert a Flash, press FLASH .
• Do not enter a pause or flash into an Intercom code.
8. Press HOLD twice.
Enter a name for the Speed Dial number.
9.
• See Name Programming Chart (page 322) for more.
10. Press HOLD .
11. Do one of the following.
a. Repeat from step 3 to program another bin.
b. Press SPEAKER to exit.
To dial a stored Personal Speed Dial number:
1. Do one of the following.
a. Press INTERCOM, dial # , then dial the Personal Speed Dial bin number (701-720).
24-Button or 34-Button Telephone Only
b.
Press bin key for bins 701-710.
Press a Feature Key set up as a Personal Speed Dial key.
c.
Super Display Telephone Only
d. • Press
• Press the soft key for the number you want to dial.
• To chain bins, wait for the first bin to dial out, then press a bin key or Feature Key.
2. • If the programmed route is busy, press an idle line key to reroute the call.
(Optional)
• You cannot chain Intercom numbers.
Programming and Dialing System Speed Dial
Forced Account Codes may prevent Speed Dial from dialing 911 emergency services.
To program a System Speed Dial number:
1. Do not lift the handset or press any keys.
2. Dial #SP (#77).
3. Dial the System Speed Dial bin number (normally 201-299).
4. Press HOLD .
5. Do one of the following.
320 ◆ Features
(bins 701-710) or
Spd Dial 1
(bins 711-720).
Spd Dial 2
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
DSX Software Manual