1621-03: Minimum DP Make Timer
(Minimum Make)
Use this option to define the minimum amount of time the loop must be closed to properly decode the dial
pulse digits sent from analog devices connected to single line PCBs. Change this value only if the con-
nected analog devices are set to dial at a rate other than 10 PPS.
Features
• None
IntraMail Features
• None
Options
•
5-1275
Default
•
mS
10
DSX Software Manual
mS
162x-SLI (Analog Single Line) Timers
System Options: 1001-1702 ◆ 691
16xx-Timers
1621-Incoming