NEC DSX Software Manual page 265

Ringing Line Preference (page 295)
Ringing Line Preference allows an extension user to answer a call ringing a loop key just by lifting
the handset.
IntraMail Features
None
Operation
To answer a call on a loop key:
Listen for ringing and look for the flashing (red) loop key.
1.
2. Lift the handset.
Press the loop key.
3.
• The loop key will light green after you answer.
• If you have Ringing Line Preference, lifting the handset answers the call.
• If you have Automatic Handsfree, you can press the loop key without first lifting the handset.
To place a call on a loop key:
1. Lift the handset.
Press the loop key.
2.
• The loop key will light green.
3. Dial the Line Group code (0-8 for groups 90-98).
For a Switched Loop key:
a. • Dial the Line Group code (0-8 for groups 90-98).
• Dial the outside number.
For a Fixed Loop key:
b.
• Dial the outside number.
DSX Software Manual
Using Loop Keys
Loop Keys
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 235