NEC DSX Software Manual page 491

3. Set the Flash and pause timers for compatibility with the connected Centrex lines.
1. Set the Flash timer for compatibility with the connected Centrex lines.
- In 1612-04: PBX/Centrex Flash Timer (page 686), set the timer for compatibility with the con-
nected Centrex service.
2. Set the Pause timer for compatibility with the Centrex Transfer feature.
- In 1602-04: Dial Pause Timer (page 673), set the timer for compatibility with the connected Cen-
trex service.
4. Enable Tandem Calls for the Centrex line.
In 3103-04: Tandem Calls (page 816), enter
1.
Other Related Features
Features
None
IntraMail Features
Dial Action Table (page 465)
Centrex Transfer uses the active Dial Action Table to route transfer an Automated Attendant caller
back to the telco using the same Centrex line.
External Transfer (page 483)
External Transfer allows an Automated Attendant caller to automatically route to an outside telephone
number.
Operation
Operation is automatic once set up in programming.
DSX Software Manual
.
Yes
IntraMail Features ◆ 461
Centrex Transfer