NEC DSX Software Manual page 284

Night Service / Night Ring
Other Related Features
Features
Direct Inward Line (page 109)
• The extension to which the DIL is terminated controls the night mode of the DIL.
• If a DIL is terminated to the voice mail master number, a UCD night key (code 18 + the voice mail
master number) controls the night mode status of the DIL.
Direct Station Selection (DSS) Console (page 120)
A DSS Console with a System night key can put the system in the night mode.
Do Not Disturb (page 143)
A DIL destination activates the night mode for the DIL when they press DND .
Group Ring (page 189)
The System night key sets the day/night status of a DIL terminated to a Ring Group.
Paging (page 259)
To have lines ring the External Paging system, see Outside Call Ringing Over External Page
(page 260). To have the ringing call also activate the system relay, see Page Relay Control (page 259)
IntraMail Features
None
Operation
To activate or deactivate Night Service (i.e., to control the night mode of Key Ring and Ring Group lines):
Do not lift the handset.
1.
Press your System night key.
2.
• While in the night mode, the key is on (red) and you see:
• While in the day mode, the key is off.
To answer a call that rings a line or loop key at night:
Listen for ringing and look for the flashing line or loop key.
1.
• Line and loop keys that flash red are for you and your co-workers.
• Line keys that flash green are just for you (such as DILs and transfers).
Lift the handset.
2.
Press the flashing line or loop key.
3.
• If you have Ringing Line Preference, lifting the handset answers the call.
• If you have Automatic Handsfree, you can press the line or loop key without first lifting the handset.
To answer a call that is ringing over the Paging speakers:
1. Lift the handset.
Dial *0 .
2.
254 ◆ Features
Using Night Service / Night Ring
SYSTEM IN NIGHT MODE.
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
DSX Software Manual