User Programmable Feature - NEC DSX Software Manual

Operation
To place a call to a co-worker using a DSS key:
Lift the handset.
1.
Press INTERCOM .
2.
• Your DSS keys show the status of the assigned extension:
Off = Idle
On = Busy or ringing
Fast flash = in Do Not Disturb
Press DSS key for the co-worker you want to call.
3.
To Transfer a call to a co-worker using a DSS key:
Place or answer an outside call.
1.
Press INTERCOM .
2.
• Your DSS keys show the status of the assigned extension:
Off = Idle
On = Busy or ringing
Fast flash = in Do Not Disturb
Press DSS key for the co-worker you want to call.
3.
Do one of the following:
4.
a.
Press TRANSFER
b. Wait for your co-worker to answer if you want them to screen the transfer, then press

User Programmable Feature

Feature
DSS
DSX Software Manual
Placing a Call using a DSS Key
Transferring a Call using a DSS Key
to have the Transfer go through unscreened.
Setting Up DSS Keys
Mnemonic
#BLF + Press Feature Key +
#BLF
(#253)
number +
SPEAKER
Direct Station Selection (DSS)
Operation
+ Enter extension
HOLD
+ Program another key or
Volume Up
to exit.
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
TRANSFER .
Access Level
1-5
Features ◆ 119